Area of use are light duty industrial for process where the floor is subjected to pallet tuck, trolley and fork lift traffic areas, car park deck, include laboratories, electronic and clean rooms, automotive assembly, aircraft hangar, garages, pharmaceutical, printing pulp paper, mills, refineries and other industrial plants sectors where chemical resistance and required.
• Seamless, monolithic application
• Hygienic, easy to clean
• High chemical resistance to wide range of chemicals
• Abrasion resistant, against light traffic and trolley movement
• Hard wearing floors finish
• Wide range of colors
Step 1: Grind and clean the surface so that there are no air bubbles left.
Step 2: Check surface moisture (below 8%)
Step 3: Apply LeafSeal F200 primer (mix materials evenly in correct ratio before rolling)
Step 4: After the primer dries for 12-24 hours, apply LeafSeal F210 coating (mix materials well in the correct ratio before rolling)
Step 5: After the first layer dries for 12-24 hours, roll the second layer perpendicular to the first layer (mix materials well in the correct ratio before rolling).
Note: The epoxy surface is a finished surface. Do not use sharp objects to walk or clean directly on the surface.